午夜日韩av,国产精品疯狂输出jk草莓视频,人人妻人人澡人人爽人人dvd

產品展廳

您當前的位置：網站首頁 > 產品展廳 >涂層 >Dampney >Thurmalox 230/230C

Thurmalox 230/230C

英文名稱：Thurmalox 230/230C

品牌：DAMPNEY

貨號：Thurmalox 230/230C

發布日期： 2021-07-09
更新日期： 2026-03-04

發送咨詢信息

產品詳請

貨號	Thurmalox 230/230C
品牌	DAMPNEY
耐洗擦性	12
是否危險化學品	否
顏色	BLACK
CAS編號
別名	Thurmalox 230/230C
保質期	12個月
耐水性
是否進口	是

Thurmalox 230 series coatings are heat resistant coatings based on silicone resins and thermally stable pigments. They are formulated specifically to protect metal surfaces operating at temperatures from 500°F (260°C) to 1000°F (538°C), with peaks to 1200°F (648°C).

For maximum corrosion protection, prime metal surfaces with Thurmalox 245 silicone zinc dust heat and corrosion resistant primer and topcoat with Thurmalox 230 series. The 245 primer/230 series topcoat system provides outstanding adhesion, film integrity, color stability, corrosion-, weathering-, and thermal shockresistance from ambient to 1000°F (538°C). Thurmalox 230 series coatings are available in a wide range of standard (see Master Color Card) and custom colors.

Attached is the standard SSPC-16 for preparing galvanized and non-ferrous metals. Brush blast with garnet or aluminum oxide to create a 0.5-1.0 mil sharp angular profile. No bead or shot blasting is suitable.

Apply two coats Thurmalox 230/230C to a dry film thickness of 1.5-2.0 mils per coat. Do not apply the 245 primer to aluminum as it contains metallic zinc dust.

? Withstands temperature of 1000°F (538° C)
? Air dries
? Easily topcoated with Dampney Topcoats
? Protects against weathering and corrosion

Common Uses

Hi-Build, Corrosion Under Insulation (CUI)
Ambient & Hot Apply
Application where (1) the benefits and features of Thurmalox 225HD are needed and (2) where federal, state, and/or local authorities require high temperature coatings to be compliant with reduced VOC (volatile organic compound) emissions regulations.

?Stacks, Breechings, Boiler Casings
?Manifolds, Mufflers and Exhausts
?Hot Piping, Process Vessels, Heat Exchangers
?Refinery Equipment - Heaters, Crackers
?Furnaces, Kilns, Heat Exchangers
?Insulated surfaces from 500°F (260°C) to 1000°F (538°C). (NOTE: 225HD must be air dried for a minimum of 7 days before insulating)

Not Recommended For:
?Interiors of breechings
?Interiors of scrubbers

相關產品：