|
| 貨號 | |
| 品牌 | TR-210 Self Stripping Liquid Release |
| 是否危險化學品 | 否 |
| 型號 | TR-210 Self Stripping Liquid Release |
| 產品等級 | 其他 |
| CAS編號 | |
| 純度 | 98% |
| 別名 | TR-210 Self Stripping Liquid Release |
| 密度 | 1.2g/cm3 |
| 產地/廠商 |
|
TR-210 Self Stripping Liquid Release Gallon Directions: On a clean surface apply a small amount with brush, spray, or cloth. Be sure entire area is covered. Allow to dry and brush or wipe off. Excellent on nonskid, grained or sand type finishes. Repeat as re Liquid mold release is recommended for use on fully cured, well conditioned molds only. It is not recommended on new or reconditioned molds until eight or ten parts have been pulled using paste wax. It should not be used as a final coat over paste wax as the high solvent content is provided to remove wax and wax build up. Rapid settling of liquid waxes requires shaking before and during each use. Each user is encouraged to prepare a test part for his or her particular application. |
TR-210自動剝離液體釋放加侖
使用方法:在清潔的表面上，用刷子、噴霧或布涂抹少量。確保覆蓋整個區域。晾干后刷掉或擦掉。優異的防滑，顆?；蛏靶惋椕妗０凑找笾貜?fù)。液體脫模建議僅用于完全固化、條件良好的模具。不建議在新的或翻新的模具上使用膏蠟拉出8或10個零件。它不應該用作膏蠟的*后一層，因?yàn)楦呷軇┖渴怯脕砣コ灪拖灧e聚的。液體蠟的快速沉淀需要在每次使用前和使用過程中搖動。鼓勵每個用戶為他或她的特定應用準備一個測試部件。
